DL type thin steel plate hook
Uses: suitable for horizontal lifting of steel plates
Material: Made of low-carbon high-quality alloy steel.
The rated load refers to the pair of lifting tongs. The maximum weight allowed for lifting when the lifting point fixture is 60°. Two or four sets are used in groups in the lifting operation.
The appropriate tongue size can be adjusted according to the thickness of the steel plate to be hung, and must be used in conjunction with the balance beam.
The test load is 2 times the maximum working load.
Prohibited overloading
Surface treatment: spray red plastic
Executive standard: JB/T 7333-2013
Material: Made of low-carbon high-quality alloy steel.
The rated load refers to the pair of lifting tongs. The maximum weight allowed for lifting when the lifting point fixture is 60°. Two or four sets are used in groups in the lifting operation.
The appropriate tongue size can be adjusted according to the thickness of the steel plate to be hung, and must be used in conjunction with the balance beam.
The test load is 2 times the maximum working load.
Prohibited overloading
Surface treatment: spray red plastic
Executive standard: JB/T 7333-2013
Ordering Consultation
Service Hotline：
|
Product Introduction
