CD steel plate hook
Uses: suitable for vertical lifting of steel plates
Material: Made of low-carbon high-quality alloy steel.
The single test is used as the rated load, and the single or two sets are used in groups in the lifting operation.
Only one steel plate can be lifted at the same time, stacking and lifting are prohibited.
When lifting, the locking handle must be pulled upward with a spring. When unloading, the locking handle must be downward. After the spring is relaxed, the pliers and the steel plate can be separated.
The test load is 2 times the maximum working load.
Prohibited overloading
Surface treatment: spray red plastic
Executive standard: JB/T 7333-2013
Material: Made of low-carbon high-quality alloy steel.
The single test is used as the rated load, and the single or two sets are used in groups in the lifting operation.
Only one steel plate can be lifted at the same time, stacking and lifting are prohibited.
When lifting, the locking handle must be pulled upward with a spring. When unloading, the locking handle must be downward. After the spring is relaxed, the pliers and the steel plate can be separated.
The test load is 2 times the maximum working load.
Prohibited overloading
Surface treatment: spray red plastic
Executive standard: JB/T 7333-2013
Ordering Consultation
Service Hotline：
|
Product Introduction
